How to measuring your wall - Do it before order your wallpaper
Check our guide to measuring your wall. If you have an unusually shaped wall that isn't listed below, get in touch and we'll help.
FULL STANDARD WALLS/Ceiling/Floor
Measure the full width of your wall from edge to edge and measure the height of both the right and left sides of your wall. We recommend that you measure both sides as the heights of the two sides can often differ. If one side is shorter than the other, select the greater of the two heights.
SLOPED WALLS
Measure the width and height of the greatest lengths on your wall only, ignoring any slopes. The mural will be supplied as a full rectangle mural and the slope should be cut away during installation.
WALLS WITH DOORS/WINDOWS
If there are any obstacles on your wall, simply measure the entire wall as you would for a full standard wall and cut away the obstacle during hanging.
Circle Ceiling or Floor
Measure the diameter, then the size is the diameter*diameter. The mural will be supplied as a squire mural and the extra parts should be cut away during installation.
Tips and Tricks
We recommend that you add an extra 5cm or 2 inches to the height and width of your mural to accommodate any variations in the height and width. Any excess can be trimmed when you hang your mural.
Double your measurements again! If you are in any doubt, add a little extra. It's easy to trim your mural.
Ideally, use a tape measure that is long enough to measure the entire wall.
If you don't want to fill your entire wall, you can order a wall mural to cover only part of it.
Need Help?
If you have any questions, just contact us and we will be happy to help you.